Smok Novo X User Manual Pdf (2024)

FAQs

How to factory reset smok novo x? ›

The recommended wattage of this 0.8ohm pod cartridge is 14w - 28w. From the aspect of my personal experience, 14w-18w would be a perfect power range for this pod in conjunction with its fixed airflow.

SMOK Novo X Dual kanthal coil 0.8ohm MTL Best 12-25W

The cherry becomes more prominent adding flavour while the menthol is stronger when vaped at 18W. I found the best results when pushing up to the maximum recommended setting of 25W.

To reset the puff count, select Puff Clear or Puff Reset from the menu, or press the Fire and Down buttons, depending on your model. Most mods can be reset to factory defaults by removing the battery and pressing the Up and Down buttons together.

The best wattage for vaping depends entirely on your vaping preferences. For mouth-to-lung vaping, pair high-resistance coils with a wattage of 7-20W. For direct-to-lung inhaling, pair low-resistance coils with a wattage of 40W or more.

You might need to change the coil every couple of days. If you are a regular vaper but not particularly heavy, it could last a week or two. Irregular or casual vapers might find they need only change their coil every four weeks.

In order to experience the seriously big vapour clouds and immense flavour profiles that the Smok X Priv is synonymous with, selecting between 80 to 11o watts will be what you're looking for. With coils providing a resistance of just 0.12 ohms, this is sub-ohm vaping at its finest.

Avoid Chain Vaping: Continuous vaping without breaks can overheat the coil and reduce its lifespan. Try to take breaks between puffs. Use the Right E-Liquid: Thicker e-liquids can clog your coil faster. Using a thinner e-liquid, especially in pods designed for nic salts, can help your pod last longer.

Why is my Novo X hitting on its own? ›

The most likely cause of auto-firing (and an easy fix) is condensation and debris in the pod chamber. If you experience auto-firing, one of the first things you should do is pull out the pod and inspect the inside chamber of the device.

However, if a coil burns out fast, it's usually for one simple reason - the coil is not saturated with e-liquid.

In most cases, the best temperature for a vape liquid is between 300-400F (194-204C). The range between 325-350F degrees is the best temperature setting for vapers in our opinion. This range provides the right balance between warmth and not too hot feel.

If you're experiencing more burnt hits than not, it's a sign that you need to replace your coil. Prolonged vaping using the same coil will eventually wear out the wick, which evaporates your e-liquid to create vapour, causing that nasty burnt taste.

The most likely cause of auto-firing (and an easy fix) is condensation and debris in the pod chamber. If you experience auto-firing, one of the first things you should do is pull out the pod and inspect the inside chamber of the device.

It's likely that the battery is simply dead. If the battery is fully charged – or you're still unable to vape after charging the battery – the next thing that you should do is check the pod. If the pod doesn't firmly touch the connections inside the chamber of the SMOK Wave, the device won't work.